VControl - version 1.7

VControl is a small AmigaOS3.x program that offers some features dedicated to the Vampire boards. It makes use the SAGA API described in SAGA SPI Flash Core article.

VControl is embedded in the SAGA Drivers packages since the 0.9c release.


  • $VER: VControl 1.7 (24.7.2018) : Fixed ChipRAM detection.

Syntax Description
>VControl HELP This help
>VControl BOARDID Output Board identifier
>VControl BOARD Output Board informations
>VControl BLITSYNC Change the BlitSync mode. 0=Off, 1=On
>VControl CLOCK Output Core Clock (Cycles)
>VControl CORE Output Core Revision String
>VControl CPU Output CPU informations
>VControl DETECT Detect compatible board
>VControl FPU Change the FPU mode and REBOOT. 0=Off, 1=On
>VControl HERTZ Output Core Frequency (Hertz)
>VControl IDESPEED Change the IDE speed. 0=Slow, 1=Fast, 2=Faster, 3=Fastest
>VControl MAPROM Map a ROM file
>VControl NOMAPROM Disable MapROM feature
>VControl NORGB Standby the native Amiga RGB output
>VControl SDSPEED Change the SDPort speed. 0=Fastest, 255=Slowest
>VControl SUPERSCALAR Change the SuperScalar mode. 0=Off, 1=On
>VControl TURTLE Change the Turtle mode. 0=Off, 1=On
>VControl VBRMOVE Change the VBR location. 0=ChipRAM, 1=FastRAM
>VControl VIDEOSLEEP Toggle the SAGA Video DMA (Off/On)

Input :

>VControl CORE
>VControl CORE >ENV:Core
>Echo "Core:" $Core

Output :

Vampire V600-128 Apollo rev 3229 x11 c7gk (silver6)
Core: Vampire V600-128 Apollo rev 3229 x11 c7gk (silver6)

VControl DETECT

IF $RC EQ 0
  ECHO "Vampire detected."
ELSE
  ECHO "Vampire NOT detected."
ENDIF
VControl DETECT

IF $RC GT 0
  ECHO "Vampire NOT detected."
ELSE
  ECHO "Vampire detected."
ENDIF
VControl DETECT

IF WARN
  ECHO "Vampire NOT detected."
ELSE
  ECHO "Vampire detected."
ENDIF
VControl DETECT

IF NOT WARN
  ECHO "Vampire detected."
ELSE
  ECHO "Vampire NOT detected."
ENDIF

Home | Links

  • vcontrol.txt
  • Last modified: 2018/07/26 19:41
  • by renaudschweingruber_txg59n64