Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
amigaos314 [2019/10/24 11:11]
bax [Kickstart 1.3 with SCSI.device]
amigaos314 [2019/11/13 09:00] (current)
bax
Line 10: Line 10:
   * Minimum Gold 2.10   * Minimum Gold 2.10
   * AmigaOS 3.1.4 ROM image purchased from Hyperion or a reseller   * AmigaOS 3.1.4 ROM image purchased from Hyperion or a reseller
-  * VampireMAP314 and VampireFlash314 copied to C: ([[http://​www.apollo-accelerators.com/​files/​AOS314VampireTools.lha|download]] v1.4 Beta update {{ ::​vampireflashmapv14.zip |}})+  * VampireMAP314 and VampireFlash314 copied to C: ([[http://​www.apollo-accelerators.com/​files/​AOS314VampireTools.lha|v1.2 download]], or v1.4 Beta update {{ ::​vampireflashmapv14.zip |}})
  
 Suitable ROM images are the A1200, A500 or A600 releases. Other variants have not been tested by the team. Please note that Core flashing is not yet enabled/​supported on Vampire V4 standalone (as of version 1.4). Use the MapROM variant in the meantime. Suitable ROM images are the A1200, A500 or A600 releases. Other variants have not been tested by the team. Please note that Core flashing is not yet enabled/​supported on Vampire V4 standalone (as of version 1.4). Use the MapROM variant in the meantime.
Line 33: Line 33:
   C:​VampireFlash314 Devs:​Kickstarts/​kick.a1200   C:​VampireFlash314 Devs:​Kickstarts/​kick.a1200
  
-Please replace the example path of the Kickstart image by the actual location on your harddrive. The tool will need about 5 minutes to compress the Kickstart image after a quick verification of Flash chip type and Kickstart location within it. The flashing may commence after the compression was finished. Please confirm the flashing procedure with YES (as shown, in caps), followed by Return.+Please replace the example path of the Kickstart image by the actual location on your harddrive. The tool will need about 5 minutes to compress the Kickstart image after a quick verification of Flash chip type and Kickstart location within it. The flashing may commence after the compression was finished. Please confirm the flashing procedure with YES (as shown, in caps), followed by <key>Return</​key>​.
  
 You need to power-cycle your Amiga after flashing. You need to power-cycle your Amiga after flashing.
Last modified: le 2019/10/24 11:11