Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
vampire:ide [2020/04/04 12:59]
muaddib
vampire:ide [2020/06/12 13:10] (current)
muaddib
Line 19: Line 19:
       * If you can't use a CF card, you might still be able to reach PIO modes 5 and 6 using another type of fast storage device, in case it **unofficially** supports those modes as a side effect of its high DMA speed.       * If you can't use a CF card, you might still be able to reach PIO modes 5 and 6 using another type of fast storage device, in case it **unofficially** supports those modes as a side effect of its high DMA speed.
     * If you attach multiple devices to a single IDE cable, the slowest device will dictate the maximum speed on this interface. ​ For example, if you have a CF card that supports PIO mode 6, its speed would be hampered by a hard disk which only supports PIO mode 4.     * If you attach multiple devices to a single IDE cable, the slowest device will dictate the maximum speed on this interface. ​ For example, if you have a CF card that supports PIO mode 6, its speed would be hampered by a hard disk which only supports PIO mode 4.
 +    * To enable “Fast IDE”, please see ''​[[:​system_tools:​vcontrol:​VControl IDESPEED]]''​.
   * When connecting or disconnecting a device on this interface, make sure that the Amiga / Vampire is powered off.  Also, disconnect all devices that have their own power connection, such as Digital Video, Ethernet and USB-Blaster cables, to prevent power backfeed into the Vampire.   * When connecting or disconnecting a device on this interface, make sure that the Amiga / Vampire is powered off.  Also, disconnect all devices that have their own power connection, such as Digital Video, Ethernet and USB-Blaster cables, to prevent power backfeed into the Vampire.
   * Be very careful when connecting a device to this interface. ​ If you shift your connector to either side of this interface (meaning that you don't cover all pins), you can cause a short circuit and destroy the Vampire.   * Be very careful when connecting a device to this interface. ​ If you shift your connector to either side of this interface (meaning that you don't cover all pins), you can cause a short circuit and destroy the Vampire.
  
Last modified: le 2020/06/12 13:10