This shows you the differences between two versions of the page.

Link to this comparison view

vampire:microsd_troubleshooting [2020/02/13 03:31]
muaddib created
vampire:microsd_troubleshooting [2020/08/02 12:37]
Line 1: Line 1:
-  * **I am getting read/write errors on my SD card inserted into the MicroSD slot of the Vampire.** 
-    * Your SD card might be bad / damaged. ​ Try a different one. 
-    * The adapters and cables between the MicroSD slot and your SD card might be bad / damaged. ​ Try different ones. 
-    * The SD card might have been prepared incorrectly. ​ Try using it on a different Amiga (or on an Amiga emulator) to make sure it is set up correctly. 
-    * Try formatting the SD card and preparing it from scratch. 
-    * If you have an extension cable, it might be too long.  Try a shorter one. 
-    * The MicroSD speed might have been set to a level that is too much for your configuration,​ especially if your extension cable is too long.  Use the ''​[[:​system_tools:​vcontrol|VControl SDSPEED]]''​ command to set a lower speed level. 
Last modified: le 2020/08/02 12:37