Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
vampire:vsa-v4:peripherals [2020/02/13 02:10]
muaddib [Mini-B USB]
vampire:vsa-v4:peripherals [2020/08/02 12:37] (current)
Line 5: Line 5:
 ===== SPI-capable Expansion Ports ===== ===== SPI-capable Expansion Ports =====
  
-  * These are the left and right Expansion Ports (''​IO Header #1''​ and ''​IO Header #​3''​ {{:​pcb_v4_up_details_r9.jpg?​linkonly|here}}).+  * These are the middle ​and right Expansion Ports (''​IO Header #2''​ and ''​IO Header #​3''​ {{:​pcb_v4_up_details_r9.jpg?​linkonly|here}}).
   * The following devices can be connected to these ports:   * The following devices can be connected to these ports:
-      * [[vampire:​vsa-v4:​ethernet|Ethernet ​modules]]+      * [[vampire:​vsa-v4:​enc28j60|ENC28J60 ​Ethernet ​Module]]
  
 ===== I2S-capable Expansion Port ===== ===== I2S-capable Expansion Port =====
  
-  * This is the middle ​Expansion Port (''​IO Header #2''​ {{:​pcb_v4_up_details_r9.jpg?​linkonly|here}}).+  * This is the left Expansion Port (''​IO Header #1''​ {{:​pcb_v4_up_details_r9.jpg?​linkonly|here}}).
  
 The following I2S devices were tested successfully with this port: The following I2S devices were tested successfully with this port:
Line 42: Line 42:
 | 5 | GND | | 5 | GND |
  
-===== 68K Bus Expansion =====+===== 68k Bus Expansion =====
  
-  * All 68K signals are available in this socket.+  * All 68k signals are available in this socket.
   * Theoretically,​ a Zorro II bridge could be built for this socket, which would allow connecting Zorro cards to the Vampire.   * Theoretically,​ a Zorro II bridge could be built for this socket, which would allow connecting Zorro cards to the Vampire.
  
Line 68: Line 68:
  
   * These two ports are reserved for USB input devices like mice, keyboards and game controllers.   * These two ports are reserved for USB input devices like mice, keyboards and game controllers.
-    * The port next to the DB-9 (Amiga joystick) ​ports is reserved for a mouse or a game controller.+    * The port next to the DB-9 ports is reserved for a mouse or a game controller.
     * The port next to the Ethernet port is reserved for a keyboard.     * The port next to the Ethernet port is reserved for a keyboard.
     * See {{:​pcb_v4_up_details_r9.jpg?​linkonly|here}} for exact port locations.     * See {{:​pcb_v4_up_details_r9.jpg?​linkonly|here}} for exact port locations.
Line 115: Line 115:
   * [[https://​www.thingiverse.com/​thing:​4147197|Acrylic Case AROS Version]]   * [[https://​www.thingiverse.com/​thing:​4147197|Acrylic Case AROS Version]]
   * [[https://​github.com/​jbilander/​Vampire_V4_Standalone_Enclosure|A Classic Amiga Enclosure]] (for 3D printing)   * [[https://​github.com/​jbilander/​Vampire_V4_Standalone_Enclosure|A Classic Amiga Enclosure]] (for 3D printing)
 +  * [[https://​gumroad.com/​l/​project_julia/​|Amiga Evolution: Project Julia]] (for 3D printing)
  
 Note that these third-party cases have not been quality-checked by the Apollo Team, so use them at your own risk. Note that these third-party cases have not been quality-checked by the Apollo Team, so use them at your own risk.
Last modified: le 2020/08/02 12:37