Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
vampire:vsa-v4:troubleshooting [2020/02/13 22:33]
muaddib
vampire:vsa-v4:troubleshooting [2020/08/12 20:09] (current)
muaddib
Line 12: Line 12:
  
 {{page>​vampire:​microsd_troubleshooting&​nouser}} {{page>​vampire:​microsd_troubleshooting&​nouser}}
 +
 +{{page>​vampire:​power_troubleshooting&​nouser}}
  
   * **My monitor / TV does not show the video output of the Vampire.**   * **My monitor / TV does not show the video output of the Vampire.**
     * Try entering the Amiga Early Startup Control, by holding down both mouse buttons during power-on. ​ If you can't see anything at this point, try pressing any key in order to switch from PAL to NTSC.  If you still can't see anything, then:     * Try entering the Amiga Early Startup Control, by holding down both mouse buttons during power-on. ​ If you can't see anything at this point, try pressing any key in order to switch from PAL to NTSC.  If you still can't see anything, then:
       * Your Digital Video cable might be bad / damaged. ​ Try a different one.       * Your Digital Video cable might be bad / damaged. ​ Try a different one.
-      * The power adapter and power cable might be bad / damaged. Try different ones. High-quality,​ high-current power adapters and short power cables are recommended. 
       * Try a different monitor / TV.       * Try a different monitor / TV.
       * Your mouse might be bad / damaged / incompatible. ​ Try a different one.       * Your mouse might be bad / damaged / incompatible. ​ Try a different one.
 +      * Refer to the other solutions for stability problems.
     * If you can see the Amiga Early Startup Control, boot your Vampire without RTG, by following the instructions under "​Disabling RTG" on [[:​system_tools:​rtg|this page]]. ​ If you can't see anything at this point, then maybe your storage device does not boot properly. ​ Please refer to the other solutions for boot problems.     * If you can see the Amiga Early Startup Control, boot your Vampire without RTG, by following the instructions under "​Disabling RTG" on [[:​system_tools:​rtg|this page]]. ​ If you can't see anything at this point, then maybe your storage device does not boot properly. ​ Please refer to the other solutions for boot problems.
  
   * **I am getting erratic behavior with my USB input devices (mouse, keyboard, etc.).**   * **I am getting erratic behavior with my USB input devices (mouse, keyboard, etc.).**
     * The power adapter and power cable might be bad / damaged. Try different ones. High-quality,​ high-current power adapters and short power cables are recommended.     * The power adapter and power cable might be bad / damaged. Try different ones. High-quality,​ high-current power adapters and short power cables are recommended.
 +    * Try a different electrical outlet.
 +    * Remove peripherals that consume too much power.
 +
 +  * **My Vampire Standalone V4 is having stability issues.**
 +    * The power adapter and power cable might be bad / damaged. Try different ones. High-quality,​ high-current power adapters and short power cables are recommended.
 +    * Try a different electrical outlet.
 +    * Remove peripherals that consume too much power.
  
 ---- ----
Last modified: le 2020/08/02 12:37